Tag Archives: yellow

World of Concrete 2012 in Las Vegas

Hello Concrete Professional,Are you attending the World of Concrete 2012 in Las Vegas?

Please accept my personal invitation to visit Roadware booth S11447
at the World of Concrete 2012. We have new Roadware concrete repair
products to show and more opportunities to grow your business than ever.

New in 2012:

Roadware MatchCrete Clear
has an improved formula that is easier to use and will not bubble or
swell under high moisture conditions. Perfect for repairing polished
concrete and exposed aggregate. We will be demonstrating this new
formula through out the day. Use MatchCrete Clear indoors or out with
confidence.

 

Roadware Off-white Concrete Mender
(formally known as MatchCrete Concrete Mender), is our color matching
base material for repairing and matching stained and polished concrete
floors.

Roadware Safety Yellow Concrete Mender is a great solution for installing permanent yellow safety floor markings.

Roadware 50ml Mini Cartridges. These easy to use cartridges are great for precise application and repairing hairline cracks.

Roadware 10 Minute Concrete Mender–
The gold standard in high-performance concrete repair for almost 20
years now. “It’s thin, it gets in, and it won’t pop out!” is not just a
slogan, we stake our reputation on it.  Roadware 10 Minute Concrete
Mender is the mission critical concrete repair product you have been
looking for. With a surface tension one third of water, this product
gets deep into concrete surfaces and structurally bonds slabs back
together.   2010 MIP Winner.

I hope we can work with you and do more business in 2012.

See you at the show!

Kelton Glewwe
Vice President
Roadware Inc.
Office: 651-457-6122
Cell: 612-801-9200

P.S.

We tend to get swamped with the crowds at the show. Feel
free to send me a text message at 612-801-9200 before or during the show
to schedule a quick meeting.

 

 

 

 

Roadware Safety Dots

Roadware distributor Bill Bacha of Precision Devices in Connecticut has developed an innovative way to create yellow safety markings in warehouse and cold storage floors. By simply using a 4′ core drill and Roadware Concrete Mender in Safety Yellow, Bill can mark safety areas that are permanent and can be applied at temperatures well below freezing.

 Use a core drill to make 3″ circle impressions about 1/4″ inch deep.

 

 Fill the circles with Roadware Concrete Mender in Safety Yellow color.

 

The safety circles will cure yellow in about 15 minutes at 70 degrees F or in an hour at 0 degrees F.

Roadware Concrete Mender in Safety Yellow permanently bonds with the concrete using Roadware’s Microdoweling™ technology.

• Integral color will not peel or chip-off.
• Apply in temperatures as low as -20°F.
• Cures forklift traffic ready in 15 minutes at 70°F.
• Easy to clean and maintain.
• High chemical resistance.
• Based on Roadware’s proven Microdoweling™ technology.

Ordering:

Call Roadware at 800-522-7623

Item 70300-y (300x300ml cartridge) Concrete Mender in Safety Yellow

Item 70020-y (2 gallon kit) Concrete Mender in Safety Yellow

Safety Yellow Line Marking with Concrete Mender™ Yellow

Roadware Concrete Mender™ is available in safety yellow.

 

Permanent safety yellow line marking with Concrete Mender™

Use for creating permanent yellow safety lines in concrete floors.
• Integral color will not peel or chip-off.
• Apply in temperatures as low as -20°F.
• Cures forklift traffic ready in 15 minutes at 70°F.
• Easy to clean and maintain.
• High chemical resistance.
• Based on Roadware’s proven Microdoweling™ technology.

Yellow Concrete Mender™ cures to a bright safety yellow color in minutes.

Yellow safety marking can be permanently installed in concrete floors with this material. The photo above shows Concrete Mender™ Safety Marking after a year of commercial service.


Bill Smith, US Food Service, Wixom, Michigan.

After years of frustration trying to keep safety line marking in place in a cold storage warehouse, Bill Smith of US Food Service in Michigan started looking for a better way. Installing safety line marking in a 38°F cold storage warehouse is especially challenging. With the 24/7 operations and the heavy fork lift traffic, there was never enough time to let traditional marking paint to cure without the forklift tires marking up the paint. At cool temperatures, the cure times were even slower. Marking tape fared no better. The cold concrete was hard to adhere to and the heavy traffic would quickly damage the marking tapes.

Bill was using Roadware 10 Minute Concrete Mender™ to repair cracks, joints, and spalls in the warehouse floor. He liked the fast cure times at low temperatures and he noted the repairs hold up very well to forklift traffic. Bill thought, “What if we could fix our safety line issue with Concrete Mender?” After experimenting with different types of Yellow sand and a request into Roadware for MatchCrete™ Concrete Mender factory colored in Safety Yellow, the line marking MatchCrete™ system was born.

After much experimentation, here is the system that works the best.
1. Scarify a shallow recess in to the concrete the length of the line marking. This can be done any number of ways. Stacking several diamond blades together and placing a temporary saw guide works best. Cut the recess about 1/4 inch deep and 1 inch wide.
2. Vacuum all dust and debris from the saw cut area. Mask off the recess with duct tape.
3. Carefully flood the recess area with Safety Yellow MatchCrete™ Concrete Mender. A small amount of safety yellow quartz sand may be used to choke-off any material that flows too far into any cracks or joints. The top of the material should be slightly recessed and smooth.

The lines will be ready for full traffic in about 15 minutes at room temperature. Give them a few hours to cure if working in a cold room or freezer. No special maintenance is required.
Ordering:

Call Roadware at 800-522-7623

Item 70300-y (300x300ml cartridge) Concrete Mender™  in Safety Yellow

Item 70020-y (2 gallon kit) Concrete Mender™ in Safety Yellow