Freezer warehouse floor with cured coating by Roadware.

New Freezer Floor Coating Stops Concrete Dusting

A new freezer floor coating developed by Roadware, Inc. can stop concrete dusting and restore freezer warehouse floors. Concrete dusting in your warehouse floor is a difficult challenge. Dusting is when the concrete surface deteriorates to powder due to heavy traffic, improper placement of the original concrete, mix design failure or a number of other reasons. Surface dusting can lead to hazardous conditions for personnel, unsanitary conditions and product contamination.  If the concrete is solid beneath the surface, these slabs can be made serviceable with specialized coatings. Coating slabs like this is even more challenging in a working freezer where temperatures are typically -20 degrees F (-29C). 

Heavily dusted concrete floor in a freezer warehouse.
Dusting concrete floors in a freezer can lead to unsafe and unsanitary conditions as well as contamination of product.

Concrete dusting can lead to the complete breakdown of the concrete wearing surface. Pallet jacks and forklifts can grind down the concrete allowing silica dust to become airborne and causing a health hazard. 

Freezer warehouse floor with failed topping slab and dusting concrete.
Freezer warehouse floor with failed topping slab and dusting concrete.

Disbonded topping slabs and epoxy coatings can also create a hazardous dusting situation. 

Freezer floor being prepared by grinding the surface flat with metal grinding pads.
Freezer floor being prepared for coating with Roadware Freezer Coating by grinding the surface flat with metal grinding pads.

Here concrete polishing equipment with metal grinding pads are used to remove the dusting surface of the concrete back to a solid surface. 

 

Freezer floor being prepared for coating with Roadware Freezer Coating by grinding the surface flat with metal grinding pads.
Freezer floor being prepared for coating with Roadware Freezer Coating by grinding the surface flat with metal grinding pads.

Hand grinders can also be used to remove the dusting surface. Dust collection systems are used to collect hazardous silica dust.

 

A craftsman mixes Roadware Freezer Floor Coating in a pail.
Roadware Freezer Floor Coating is easily mixed in a pail using a ratio of 1 part ISO, 1 part POLY and 1 part manufactured sand.

Roadware Freezer Floor Coating is mixed at a ratio of 1:1:1:

One quart A

One quart B

One quart 4030 grit silica or manufactured quartz sand.

Combined on a pail and mix with a paint stick or 10 seconds. Apply immediately. 

Coverage rate shown here is approximately 2.5 Meters Sq per mixed liter. 

Keep materials at outside the freezer at about 60-70 degrees before mixing.  Floor and air temperatures in the freezer for this project were -4 degrees F (-20C).

 

Craftsman trowel down a thin sealer coat of Roadware Freezer Floor Coating on to a prepared concrete floor at below freezing temperatures.
Craftsman trowel down a thin sealer coat of Roadware Freezer Floor Coating on to a prepared concrete floor at below freezing temperatures.

A single trowel down application is all it takes to provide a new surface to the concrete and good working floor. Product is applied at freezer operating temperatures. Product cures in several hours depending on the temperature and odor is very slight. Stand-up trowels may be used as well. 

  See craftsmen with Concrete Dr in Seoul, Korea apply Roadware Freezer Floor Coating at -4 degrees F (-20C) . A propane torch is used to remove flash frost just before application. 

 

Freezer warehouse floor coated with Roadware Freezer Floor Coating.
Freezer warehouse floor coated with Roadware Freezer Floor Coating.

Full warehouse traffic can resume in 10 hours after application.

 

Freezer warehouse floor with cured coating by Roadware.
Freezer floor coated with the Roadware Concrete Mender Freezer Coating System. This resilient coating can be applied at freezer operational temperatures and cures within hours.

Floors treated with Roadweare Freezer Floor Coating are  resilient and serviceable once again.

 

Product: Roadware Freezer Floor Coating

Features:

  • Low Viscosity
  • Easy Mixing
  • Fast Curing in sub zero applications
  • Very low odor
  • Very low VOC’s that polymerize into the material.

Benefits:

  • Freezer floors can be repaired or coated while operating.
  • Can be applied in odor sensitive areas.
  • Easy trowel down application.
  • Warehouse traffic can resume in 12-24 hours depending on temperature. 

Uses:

  • Coating freezer floors to reduce dusting and improve riding surface.
  • Repairing cracks, joints, and spalls in freezers.

 

Limitations: 

  • Products cures a translucent natural amber.  Dry colored pigments may be added to the final mixing process if needed. 
  • Surface must be, clean, dry and free of frost. 
  • Frost and moisture must be removed with a propane torch or electric heated air just before application. 
  • Excess moisture can cause the product to whiten in high moisture areas and will cause an inconsistent look.

 

Roadware Freezer Floor Coating is available on a special order basis at this time. Call 800-52-7623 for more information. 

 

3 thoughts on “New Freezer Floor Coating Stops Concrete Dusting”

  1. We love Roadware products for our business Macon foundation and concrete. We are big fans of the mender products. Do you have specific products for foundation?

    1. There are some specific applications where Concrete Mender would be an excellent choice. For any residential applications, we recommend using Concrete Mender VO zero VOC repair polyurethane.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.