Roadware 10 Minute Concrete Mender™ Top Applications

Roadware 10 Minute Concrete Mender™ top applications:

General full depth crack repair:

Use the high-penetration abilities of Roadware 10 Minute Concrete Mender™ to make full depth crack repair.

 

CRACK REPAIR

1. Clean out with diamond grinder and remove dirt and dust.
2. Flood with Roadware 10 Minute Concrete Mender™
3. Add a fine graded silica sand and additional liquid to grade.
4. Strike off excess material and allow to cure for 10 minutes at 70°F.
5. Open to traffic. Finish and blend with a grinding stone if desired.

 

SPALL REPAIR

1. Clean out with diamond grinder and remove dirt and dust.
2. Flood with Roadware 10 Minute Concrete Mender™
3. Add a fine graded silica sand and additional liquid. Work in one inch lifts to grade.
4. Strike off excess material and allow to cure for 10 minutes at 70°F.
5. Open to traffic. Finish and blend with a grinding stone if desired.

HAIRLINE CRACKS

1. Score the top of the crack with diamond blade or wire brush.
2. Remove dust with a vaccume.
3. Flood with Roadware 10 Minute Concrete
Mender™ supplied in twin cartridges and optional needle tip mixer.
4. Add a fine graded silica sand to larger areas and allow to soak in.
5. Strike off excess material and allow to
cure for 10 minutes at 70° F.
6. Open to traffic. Finish and blend with a
grinding stone if desired.

SPALLED CONTROL JOINT

(Fully cured non-moving)
1. Clean out with diamond grinder and remove dirt and dust. Score back spall with blade for a finished look.
2. Flood with Roadware 10 Minute Concrete Mender™
3. Add a fine graded silica sand and additional liquid to grade.
4. Strike off excess material and allow to cure for 10 minutes at 70°F.
5. Open to traffic. Finish and blend with a grinding stone if desired.

DELAMINATED SLAB

1. Drill hole into void.
2. Remove dust with a vacuum.
3. Flood with Roadware 10 Minute Concrete
Mender™ supplied in twin cartridges.
4. Add a fine graded silica sand and
additional liquid to fill holes to grade.
5. Strike off excess material and allow to
cure for 10 minutes at 70° F.
6. Open to traffic. Finish and blend with a
grinding stone if desired.

THRESHOLDS AND
UNEVEN SLABS

1. Clean out with diamond or wire grinder and remove dirt and dust. Score lower edge with diamond blade for a finished look.
2. Flood with Roadware 10 Minute Concrete Mender™
3. Add a fine graded silica sand and additional liquid to a mortar consistency.
4. Shape with a clean steel trowel and allow to cure for 10 minutes at 70° F.
5. Open to traffic. Finish and blend with a grinding stone if desired. Maintain existing expansion joint if necessary.

One thought on “Roadware 10 Minute Concrete Mender™ Top Applications”

Comments are closed.