How often have you run into this problem? Industrial railings that have been split apart due to age, abuse, or weather damage. With a few special techniques, you can repair these problems with Roadware 10 Minute Concrete Mender™.
Clean the repair area with a wire brush or by sandblasting. Remove as much of the rust as possible. It is also a good idea to spray the the steel railing with a rust neutralizer.
Make a simple form out of blue foam board, and duct tape or most anything plastic. Do not use wood, Concrete Mender will permanently bond the wood to your railing base.I made that mistake years ago and had to chip, grind and sand the wood off the face of the concrete.
Make your repair by pouring 10 Minute Concrete Mender™ bulk mixed with sand in from the top. Allow to cure and finish the surface with a stone or grinder.
Add a quick coating of a latex cement coating and your finished. You may also make repairs around railings with Roadware Flexible Cement II™ if the railing is made aluminum and requires more thermal contraction and expansion properties.
I feel like I’m constantly looking for interesting things to read about a variety of subjects, but I manage to include your blog among my reads every day…!
Floor Resurfacing Toronto