Roadware distributor Bill Bacha of Precision Devices in Connecticut has developed an innovative way to create yellow safety markings in warehouse and cold storage floors. By simply using a 4′ core drill and Roadware Concrete Mender in Safety Yellow, Bill can mark safety areas that are permanent and can be applied at temperatures well below freezing.
Use a core drill to make 3″ circle impressions about 1/4″ inch deep.
Fill the circles with Roadware Concrete Mender in Safety Yellow color.
The safety circles will cure yellow in about 15 minutes at 70 degrees F or in an hour at 0 degrees F.
Roadware Concrete Mender in Safety Yellow permanently bonds with the concrete using Roadware’s Microdoweling™ technology.
• Integral color will not peel or chip-off.
• Apply in temperatures as low as -20°F.
• Cures forklift traffic ready in 15 minutes at 70°F.
• Easy to clean and maintain.
• High chemical resistance.
• Based on Roadware’s proven Microdoweling™ technology.
Ordering:
Call Roadware at 800-522-7623
Item 70300-y (300x300ml cartridge) Concrete Mender in Safety Yellow
Item 70020-y (2 gallon kit) Concrete Mender in Safety Yellow