Extreme Concrete Repair and Polish

Great polished concrete starts with great concrete repair. When an existing floor is damaged by deep cracks, spalling, and surface deterioration, simply grinding deeper isn’t always the best answer. Repairing those defects with Roadware 10 Minute Concrete Mender™ before polishing allows contractors to address damaged areas first, then grind, refine, and polish the restored concrete into the finished floor.

How do polish a floor when your concrete is like this?

Deep cracks and surface spalling can make polishing jobs costly and difficult.  A lot of the top surface has to be removed to get to a smooth finish.

Roadware 10 Minute Concrete Mender™ is a great choice for filling out all the cracks, spalls and holes before polishing.

This floor was repaired by troweling down a thin layer of Concrete Mender and sand, then ground smooth. A liquid hardener completed the restoration and the floor was polished.

 

The floor shows zero failure shown here 3 years later in 2007.  The floor continues to perform today.

 

author avatar
Kelton Glewwe Vice President of Operations / Founder