Tag Archives: pebblecrete

Contractor uses 10 Minute Concrete Mender to make pebble-crete floor.


Basic SYSTEM in Bahrain is using Roadware 10 Minute Concrete Mender™ to make rapid curing pebble-crete flooring in Bahrain. The easy mixing Concrete Mender combines with the pebbles and acts as a binder in seconds. The mixture is easy to apply and trowel flat without getting sticky until the final minutes of curing. See the video here.

UPDATE May 4th, 2015


“I will take the opportunity of this e-mail & send you a recent photo of the pebbles application with Concrete mender at PinkBerry frozen yogurt / pictures was taken today, the floor is performing well and the client is very happy / the application will be repeated in Future PinkBerry shops in the region…”

Regards

George Honein

Basic SYSTEM in Bahrain is using Roadware 10 Minute Concrete Mender™ to make rapid curing pebble-crete flooring in Bahrain. The easy mixing Concrete Mender combines with the pebbles and acts as a binder in seconds. The mixture is easy to apply and trowel flat without getting sticky until the final minutes of curing. See the video here.

Pebble floor application at a Pinkberry Store in Bahrain. 

600ml of Roadware 10 Minute Concrete Mender™ is combined with about 6kg of 3-5mm pebbles. The components are mixed be hand, spread out on the floor about 3cm deep and troweled flat. 600ml

The pebbles are completely coated and help in place by the Roadware 10 Minute Concrete Mender™. The floor performs well and creates the look specified by the designer. The floor does not need further sealing. Daily maintenance consists of vacuuming and mopping.

When I first saw this application, I had some questions:

Hello George at Basic SYSTEMS in Bahrain.

Your application has not been tried before with Concrete Mender.
How does the surface look?

It’s giving a wet look / looking really nice.. they have used resin in the past in other outlets, but the problem it was not strong enough and was smelling due to cleaning process.

Are the rocks coated completely?

We have mix it with in a bucket with the Concrete Mender / pebbles size was 3 to 5mm, we have used 600 ml of CM and an average of 6 kg of pebbles, it was completely coated

Do any of the rocks come loose? 

Yes some, but it was superficial, we brush it out with hard brush the next day and fill the few areas where the pebbles was removed with same mix materials…

Will the floor be easy to clean?

Well vacuuming and mopping was our instruction to follow…

Do you use a clear sealer after the application?

The pebbles are completely coated/ by sealing it, will loose the natural look as required in the concept design.

See the video here: