One question we get asked all the time is if we can make a crack disappear. For the most part the answer has always been no. We can make a good repair and finish it as close as we can to the original color and surface texture. That was before Roadware MatchCrete™ Clear came along. The photos below were sent in by a concrete polishing contractor. By using MatchCrete™ clear and sand that matches the surrounding concrete, the polished repair blends in very nicely with the concrete slab. When the floor is in service, you will have to look very carefully to find the repairs. Try some Roadware MatchCrete™ Clear on your next polishing job. With a little technique and experimentation, you can get results like this.
Polished concrete repair with Concrete Mender™ Off-white.
Did the crack disappear? If you don’t notice it anymore, what’s the difference?
Recently a customer sent me several cut sheets from other manufactures of look-alike concrete repair products and asked me to compare them with Roadware 10 Minute Concrete Mender™. Here is how it played out.
Dear Dave,
We here at Roadware are familiar with the knock-off and look-alike products you submitted for our review. These products fall into the category of a low viscosity polyurea. Basically, what they have done is modify a standard polyurea joint filler and added a solvent to make it appear as a high-penetration Concrete Mender™-like product. They are all missing the key property and process that makes Roadware 10 Minute Concrete Mender™ unique and superior in overall performance. This process is called Microdoweling™.
Roadware’s Microdoweling™ process uses a proprietary formula of polyurethanes and additives to achieve a measured surface tension of 0.026 N/m. (1/3 of water) Surface tension is a measurement of a liquids ability to break free of its own molecular friction and flow into something else. Microdoweling™ is why Roadware 10 Minute Concrete Mender™ can penetrate easily into a concrete surface under adverse conditions, as is the case in distressed, broken and cracked concrete.
Other advantages for Roadware 10 Minute Concrete Mender™ are:
The lowest viscosity for easier mixing and blending.
Easy, one-step polishing and grinding. This material will not melt, smear, or gum up diamond polishing pads. An excellent parging compound.
Experienced and advanced packaging. Roadware cartridge packaging is reliable and works well in the field.
End-user color blending. New MatchCrete™ Concrete Mender can easily be manipulated into many colors by modifying the sand or adding pigments.
A modulus of elasticity that is slightly less then the concrete so repairs will move with the concrete and not against it.
Needle tip application. A complete system of needle-tip cartridge mixers for pin-point application and hairline crack repair.
It’s all in the data. Roadware backs up the Microdoweling™ process with independent testing data and publishes it on our website, www.roadware.us.
Thank you for continued support and please call us any time if you have any questions.
A common concrete repair problem is broken steps. Roadware 10 Minute Concrete Mender™ is a good choice for repairing steps and curbs. Here is a repair sent in by Roadware distributor Minitman Supply in Colorado.
Rebuild of a Damaged Step Corner
A repair like this one starts with cleaning the concrete with a wire brush or diamond blade. Use blue Dow board to make a form and hold it in place with duct tape.
Fill the repair area with Roadware 10 Minute Concrete Mender™ combined with silica sand. Pull the form after the material sets in about 10 – 20 minutes depending on temperature.
After you remove the forms, you will see something like this.
Use a finishing stone to bland and contour the repair into the rest of the steps. A finish coat of a latex cement finishing coat over the entire stairway will have your steps looking good as new.
Finish all surfaces for a uniform look.Be sure to finish the sides as will.
Recently Dave Wilson, of Roadware Distributor Fowler Supply received this email on behalf of a East Tennessee Construction Services.
From: Retail Facilities Maintenance Call Center
Subject: concrete repair
Possible safety hazard in garden center patio. Please dispatch concrete repair specialist to evaluate and remedy the situation as soon as possible. Customer safety is a top priority.
Store Manager
Store #XXX
Georgia
Emergency repairs are common for Roadware contractors. When safety is on the line and a store needs something repaired quickly and permanently, Roadware Concrete Repair Products are the clear choice due to minimal down time and minimal intrusion to facility operations.
When Dave Wilson arrived on site, this is the trip hazard condition he found.
Repair top portion of spalled joint using new Roadware MatchCrete™ Clear (MCC) colored with Davis Colors pigment to match the surrounding concrete. MCC is used because it will not change color when exposed to UV sunlight as is the case in a garden center.
Finish to grade.
Roadware 10 Minute Concrete Mender™ and silica sand is added to the bottom of the repair. This provides a tough Microdoweling™ repair and seals off and moisture in the substrate.
Roadware MatchCrete™ Clear and a mixture of silica sand blended with about one teaspoon of powdered Davis Color is added to the repair.
The Roadware MatchCrete™ Clear and sand mixture is troweled in place and allowed to cure for about 45 minutes.
After curing, the surface is ground smooth and the control joint is re-sawn with a diamond blade.
Traffic is restored immediately. Danny, the associate who requested the work order was, “Amazed.”
When the job has to be done quickly and correctly. Roadware Concrete Repair products are always at the ready.
Special thanks to Dave Wilson at PatchMyConcrete.com for sending this in!
Today I received several photographs of a large crack that developed under a hardwood floor in a slab-on-grade application. The crack buckled the hardwood flooring. The home owner consulted several contractors and engineers to solve the problem. No cost-effective solution could be found until Roadware contractor, Clay Kenny, (Manderville, Lousiana) arrived on the scene.
Using Roadware 10 Minute Concrete Mender™ and silica sand, Clay repaired the crack to full depth and re-bonded the slabs back together using Roadware’s Microdoweling™technology.
The repairs cured in just 10 minutes and Clay was on and off the job in just 3 hours. The home owner was amazed. Clay and 10 Minute Concrete Mender™ did what couldn’t be done. The hard wood flooring was re-installed and the floor was put back in service faster then anyone could imagine. This repair took nine 600ml cartridges of #80300 Roadware 10 Minute Concrete Mender™ and a 40 lbs bag of silica sand to complete. The Concrete Mender™ turned a flooring disaster into an opportunity.
Anyone in the concrete business knows that concrete can be unpredictable and even a well thought-out project can develop cracks. Some are minor, and some can cause a real problem. Roadware 10 Minute Concrete Mender™ can help make the problems manageable.
The days of super-sized everything arrived about a decade ago, making large concrete-floored buildings common in a sea of commercial applications, including box-retailing, airports, malls, convention halls, and more. It also created demand for concrete polishing unlike anytime in the past. Today, professionally polished or decorated concrete floors are coveted for their clean, low maintenance finish, their dust-free, smooth feel, and for their aesthetically pleasing look. Managers report how polished floors boost morale among employees, improve light reflectivity (reducing light usage) and garner positive customer comments.
The market for concrete polishing and design continues to flourish and evolve. What hasn’t changed is the need to repair cracks, chips, joints and spalls in the floor prior to polishing. Without the proper repair material, the repair will fail, sometimes quickly costing time and money.
Curtis Venable is president of C&C Construction Co., a concrete repair and polishing services provider. Venable said that cracks, spalls and other deformities in the concrete must be properly repaired before polishing. Use of an inadequate repair product, or improper use of a repair product can cause more problems than they solve.
“I don’t want to get a call from a client at midnight wondering why a chip repair popped out in the middle of his floor,” said Venable. “Improper or poor repair prior to polishing is bad service and undermines my credibility with my clients.”
While Venable utilizes various repair products depending on the job, he often relies on 10-Minute Concrete Mender™ by Roadware, Inc (www.concretemender.com). Concrete Mender combines with sand to form a tough instant polymer concrete.
Reliability
Venable uses Concrete Mender for several reasons. First, he said, Concrete Mender penetrates deep into concrete to establish a permanent bond with the host concrete, producing repairs that absorb the shock and transfers the load of heavy traffic without cracking or disbonding. Its chemical resistance means it can be applied in a wide range of temperatures.
“I know that it won’t melt, smear or come out of a repair when my polishing machines are run over it,” he said. “And I can apply it in cold temps found in freezers.” Concrete Mender accomplishes its unbreakable bond through a process called Microdoweling™. Microdoweling drives the repair deep into the micro-fissures of the crack, joint or spall, where it forms an unbreakable bond with the existing concrete.
“The Microdoweling capabilities eliminate the anxiety caused by the liability that I and all contractors must carry for each job,” he said. “I know of jobs that are going on six and seven years without Concrete Mender failing in any way.”
Application Efficiency
Besides performing for years, it cures in only 10 minutes. At a recent job in which Venable repaired and then polished an 110,000-square-foot concrete floor for a national grocery retailer, he used Concrete Mender for efficiency reasons.
Venable inspected every chip, crack and spall before the job began, looking for joints where the filler has come out, anchor bolt holes, corner chips and spalls. He assessed each repair, and then made recommendations that clients repair each one.
“I put six people on polishing machines to work at the site for almost three weeks,” he recounted. “It becomes expensive if I have to wait for the repair material to set. Concrete Mender takes only 10 minutes.”
Blending
Finally, Venable said his customers require that the shade of the repair material match the existing concrete for aesthetic reasons. Large retailers, such as Home Depot and Sam’s Club, understand that today women are making many of the purchasing decisions for the home, including home repair. Because women prefer shopping in light and well-kept stores, shiny, clean floors are important to a retailer’s image. A patchwork of different repair shades and colors has become unacceptable among peer retailers.
After hardening, Concrete Mender blends flawlessly with surrounding concrete, resulting in a near perfect color match. After polishing or coloring, a repair made with Concrete Mender is indistinguishable from the original floor.
“Having various shades and colors of repairs on the floor is unacceptable in the concrete polishing industry,” said Venable. “Today, to meet the expectation of women shoppers, repairs must blend to give the appearance of a single, neat and clean finish.”
Concrete Mender can serve many demands in the concrete polishing industry. It hardens within 10 minutes, after which it can be treated like the surrounding concrete. It can be cut and polished, and won’t smear or come out in the process. It’s efficient for use on large jobs, including where heavy machinery is operated, airport hangers, freezers, retailers and more.
“Concrete polishing is an expanding market and becoming more competitive,” said Venable. “I have confidence in Concrete Mender to help me meet customer expectations of looks, performance and efficiency.”
For more information 10-Minute Concrete Mender, contact Roadware, Inc. at www.concremender.com. For more information about C&C Construction, visit www.candcconst.com.
Contact Information: Richard E. King Kelton E Glewwe Roadware Incorporated 381 Bridgepoint Way South Saint Paul, MN 55075
Microdoweling™, Roadware 10 Minute Concrete Mender™, and respective logos are trademarks of Roadware, Inc. Copyright 2008.
Roadware MatchCrete™ Clear (MCC) is a two component aliphatic polyurethane for repairing cracks, spalls, and joints in concrete subject to UV exposure from sunlight. This material is clear in appearance when applied and cured. Colored sand and pigments may be added to create color stable repairs that match most any decorative or shade of concrete surface. MCC will not significantly change color with exposure to sunlight over time.
Use Roadware MatchCrete™ Clear (MCC) to quickly repair cracks and spalls in concrete that is exposed to sunlight and where a color compatible appearance is desired.
Who would want a “clear” concrete repair product? What could you use it for?
For over 15 years, Roadware manufactured 10 Minute Concrete Mender™ in one standard concrete grey color. It was simple and straight forward. Concrete is grey! The repairs should be grey. Then everything changed. In the past five years, decorative concrete has exploded into the marketplace. Now you can have your concrete in nearly limitless color choices and textures. We developed MatchCrete™ Clear to give you endless color possibilities as well. So, what can you do with MatchCrete™ Clear?
Cracks and Saw-cut Control Joints:
Clear- Use MCC without sand to create an eye pleasing joint that will not distract from the overall look.
Colored and Clear – Stain the sidewalls of a crack or joint and fill with MCC to create a colored joint effect.
Colored Sand- Use MCC with colored sand or colored quartz to make nearly any color repair.
Colored Aggregate- Use MCC and colored aggregate to make a granite or stone effect.
Concrete Dust- Use MCC and concrete dust to make a portland concrete look.
Dry Pigment- Use MCC, sand, and some dry concrete pigment to create most any matching color.
Dry Shake- Add a bit of dry shake color to your MCC repair for matching color effects.
Decorative Use:
Joints and Cracks- Fill joints and cracks around concrete, stone, tile, or terrazzo without becoming an eyesore.
Exposed Aggregate- Repair cracks, spalls, and knock-outs.
Pool Decks- Repair coatings and de-laminations.
Polishing:
Joints- Use MCC for polished joints that match the concrete and look good.
Design- Use MCC to embed items into the concrete and polish the surface flush.
Lighting- Use MCC to embed LED lighting into concrete walkways and decks for dramatic effects.
Exterior Use:
Use MCC in areas exposed to sunlight where color stable repairs are necessary such as driveways, sidewalks and entryways.
Architectural Use:
Use MCC to repair cracks, joints and spalls in high profile building entrances, courtyards, and common areas. Repairs with MCC will not distract from the overall appearance and design.
Roadware 10 Minute Concrete Mender for cold storage facilities
Roadware 10 Minute Concrete Mender™ is the premier concrete repair product for refrigerated and freezer warehousing and grocery distribution. Moreover, this Microdoweling™ polyurethane cures in hours at temperatures well below -30° degrees F (-34° C). This is essential for freezer floor, concrete repair, cold storage environments.
Features:
Easy-to-mix one-to-one ratio polyurethane.
Add manufactured sand to extend the material by more than double. Two gallons of Concrete Mender™ will make 4.4 gallons of repair material.
Ultra-low viscosity for easy application and workability.
Microdoweling™ penetration into the concrete for load-transfer bonding.
Cures only as hard as the concrete. Will not become brittle like epoxy.
Tough repairs that can take industrial levels of punishment.
Benefits:
Smooth and safe floors.
Less damage to forklifts and equipment.
Clean floors. Meets FSIS and USDA guidelines.
Less tipped loads and damaged product.
Reduced cleaning and floor maintenance costs.
Reduced workers comp claims attributed to accidents.
Repairing Cooler and Freezer Concrete with Roadware 10 Minute Concrete Mender™
Cooler and freezer floors present unique repair challenges, from low temperatures and extended cure times to moisture, frost, enclosed spaces, and limited preparation options. This guide outlines how Roadware 10 Minute Concrete Mender™ can be used to repair cracks, spalls, thresholds, and surface defects in cold-storage environments when proper preparation and safety precautions are followed.
Application Overview
For cracks, Concrete Mender is applied directly into the crack and layered with 40–30 grit silica sand until the repair is filled, saturated, struck flush, and allowed to cure. For spalls and thresholds, the guide recommends building repairs in layers using a resin-rich mixture of Concrete Mender and silica sand, typically at a ratio of 1 part mixed Concrete Mender to 2 parts sand, with additional sand added only as needed for placement.
Safety and Best Practices
Because cooler and freezer repairs often occur in enclosed environments, ventilation and odor control are important considerations. Do not perform repairs near active food preparation areas or close to odor-sensitive merchandise. For best results, keep all materials dry and warm, and ensure the surrounding concrete is completely dry and free of frost and ice.
Download the Cooler and Freezer application guide here:
Contains information related to marketing campaigns of the user. These are shared with Google AdWords / Google Ads when the Google Ads and Google Analytics accounts are linked together.
90 days
__utma
ID used to identify users and sessions
2 years after last activity
__utmt
Used to monitor number of Google Analytics server requests
10 minutes
__utmb
Used to distinguish new sessions and visits. This cookie is set when the GA.js javascript library is loaded and there is no existing __utmb cookie. The cookie is updated every time data is sent to the Google Analytics server.
30 minutes after last activity
__utmc
Used only with old Urchin versions of Google Analytics and not with GA.js. Was used to distinguish between new sessions and visits at the end of a session.
End of session (browser)
__utmz
Contains information about the traffic source or campaign that directed user to the website. The cookie is set when the GA.js javascript is loaded and updated when data is sent to the Google Anaytics server
6 months after last activity
__utmv
Contains custom information set by the web developer via the _setCustomVar method in Google Analytics. This cookie is updated every time new data is sent to the Google Analytics server.
2 years after last activity
__utmx
Used to determine whether a user is included in an A / B or Multivariate test.
18 months
_ga
ID used to identify users
2 years
_gali
Used by Google Analytics to determine which links on a page are being clicked
30 seconds
_ga_
ID used to identify users
2 years
_gid
ID used to identify users for 24 hours after last activity
24 hours
_gat
Used to monitor number of Google Analytics server requests when using Google Tag Manager
1 minute
Jetpack's built-in visitor analytics. It records page views, referring sites, search terms, and outbound link clicks, and also carries the shared visitor-tracking library used by Jetpack Instant Search and WooCommerce Analytics.
This cookie is used to save the visitor's selected language choice when viewing pages in multiple languages.
2 years
__hstc
The main cookie for tracking visitors.
13 months
hubspotutk
This cookie keeps track of a visitor's identity. It is passed to HubSpot on form submission and used when deduplicating contacts.
13 months
__hssc
This cookie keeps track of sessions.
30 minutes
__hssrc
Whenever HubSpot changes the session cookie, this cookie is also set to determine if the visitor has restarted their browser.
session
messagesUtk
This cookie is used to recognize visitors who chat with you via the chatflows tool. If the visitor leaves your site before they're added as a contact, they will have this cookie associated with their browser.
13 months
hubspotapi
This cookie allows the user to access the app with the correct permissions.
7 days
hubspotapi-prefs
This is used with the hubspotapi cookie to remember whether the user checked the 'remember me' box (controls the expiration of the main cookie's authentication).
1 Year
__hs_opt_out
This cookie is used by the opt-in privacy policy to remember not to ask the visitor to accept cookies again.
13 months
hubspotapi-csrf
This is used for CSRF prevention - preventing third party websites from accessing your data. Expires after a year.
1 year
__hs_do_not_track
This cookie can be set to prevent the tracking code from sending any information to HubSpot.
13 months
__hs_cookie_cat_pref
This cookie is used to record the categories a visitor consented to.
6 months
__hs_initial_opt_in
This cookie is used to prevent the banner from always displaying when visitors are browsing in strict mode.
7 days
__hs_gpc_banner_dismiss
This cookie is used when the Global Privacy Control banner is dismissed.
180 days
hs_ab_test
This cookie is used to consistently serve visitors the same version of an A/B test page they’ve seen before.
session
__hs_notify_banner_dismiss
This cookie is used when the website uses a Notify consent banner type.
180 days
hs-messages-is-open
This cookie is used to determine and save whether the chat widget is open for future visits.
30 minutes
hs-messages-hide-welcome-message
This cookie is used to prevent the chat widget welcome message from appearing again for one day after it is dismissed.
1 day
__hsmem
This cookie is set when visitors log in to a HubSpot-hosted site.
1 year
hs-membership-csrf
This cookie is used to ensure that content membership logins cannot be forged.
session
X Pixel enables businesses to track user interactions and optimize ad performance on the X platform effectively.
This cookie is set by X to identify and track the website visitor. Registers if a users is signed in the X platform and collects information about ad preferences.
2 years
personalization_id
Unique value with which users can be identified by X. Collected information is used to be personalize X services, including X trends, stories, ads and suggestions.
2 years
external_referer
Our Website uses X buttons to allow our visitors to follow our promotional X feeds, and sometimes embed feeds on our Website.
2 years
A video-sharing platform for users to upload, view, and share videos across various genres and topics.
Registers a unique ID on mobile devices to enable tracking based on geographical GPS location.
1 day
VISITOR_INFO1_LIVE
Tries to estimate the users' bandwidth on pages with integrated YouTube videos. Also used for marketing
179 days
PREF
This cookie stores your preferences and other information, in particular preferred language, how many search results you wish to be shown on your page, and whether or not you wish to have Google’s SafeSearch filter turned on.
10 years from set/ update
YSC
Registers a unique ID to keep statistics of what videos from YouTube the user has seen.
Session
DEVICE_INFO
Used to detect if the visitor has accepted the marketing category in the cookie banner. This cookie is necessary for GDPR-compliance of the website.
179 days
LOGIN_INFO
This cookie is used to play YouTube videos embedded on the website.