Here is the Roadware Concrete Mender One Page Pitch. Things you need to know when considering, recommending, specifying, and using Roadware 10 Minute Concrete Mender™
Download the PDF here:

Roadware stands ready to supply immediate concrete repair needs for warehouses, cold chain logistics, manufacturing, and supply. Repairs can be made with almost no downtime and under operational conditions. Please call 1-800-522-7623 or 1-651-457-6122 to be connected with our worldwide network of distributors waiting to assist. Or, send email to sales@concretemender.com
We ask that visitors to Roadware Headquarters in South St Paul, MN, or any of our Roadware Distributors, call the location ahead to verify operating hours and local conditions.
Local distributor information can be found here:
Thank you and be safe,
Roadware, Inc.
Two post automotive hoists and lifts are generally bolted to the floor using compression anchors. When the lift needs to be replaced, the new anchors can not interfere with the old anchor points. If the old anchor points are too close to the new anchor points, the concrete needs to be replaced before the new lift can be installed. This can close a service bay for a month or more.
With Roadware 10 Minute Concrete Mender, we can remove the old compression anchors, repair the concrete and install new compression anchors without having to replace the concrete.
After removing the old lift, the compression anchors need to be removed. If the original anchor hole was drilled full depth, they can be driven down beneath the floor with a hammer and a punch. If the anchor are not full depth, a core drill is used to remove the anchor.
After drilling, the holes are cleaned and reamed with a reaming bit to roughen up the sidewalls. A shop-vacuum is used to remove all dust and debris. The concrete is than cleaned with alcohol or a similar evaporating cleaner. The holes have to be clean and completely dry before proceeding.
Use duct tape to mask off the holes to be filled with Roadware 10 Minute Concrete Mender™

Gather the materials needed to repair the holes. Roadware 10 Minute Concrete Mender is designed to repair cracks, spalls and holes in concrete. Not just simply fill them. The Microdoweling™ penetration of Concrete Mender into the concrete is a structural repair and can bring the concrete back to original design parameters.
Items needed:
We made a short video to demonstrate the basic technique of filling a core drilled hole in concrete. Concrete Mender doubles in volume when adding sand. All we need to do is fill the hole halfway with Concrete Mender and then add sand to bring it up to the top. Note: In the field it may be impractical to get the bottom of the hole completely dry or clean especially if the hole is full depth into the base material. Simply repair the bottom 1/4 of the hole with Concrete Mender and sand first and allow it to cure before repairing the rest of the hole up to the top.
Measure out equal parts of Side A and Side B Concrete Mender and combine them into your mixing bucket. Mix with a stick by hand for about 15 seconds.
Pour equal parts A and b into a mixing container and mix for about 15 seconds with a mixing stick.
Fill the holes half-way with mixed Roadware 10 Minute Concrete Mender.
Add sand into the hole bringing the Concrete Mender level up to the surface. Make sure all the sand is completely saturated.
Level the surface with a trowel or stick and allow to cure for about 10 minutes at 70 degrees F (21C).
Remove the tape after the Concrete Mender cures and turns grey in about 10-15 minutes.

A finishing rubbing brick is used to quickly bring the repairs flush with the floor.

Holes to anchor the new lift are marked and drilled into the concrete. Time to test the repairs and make sure the repairs will hold the anchors for the new lift.

New compression anchors are installed and torqued to the specified level.

For the repair to be successful, the compression anchor must hold 3000 lbs or 1360 kg for 12 hours without cracking or splitting of the surrounding concrete.


Several anchor were tested. All passed and the lift was installed the next day and placed into service. Roadware 10 Minute Concrete Mender™ is designed to bring most concrete slabs back to original design strength. Repairing anchor holes prior to new automotive lift installation with Roadware 10 Minute Concrete Mender is now the specified choice for two of the largest auto service companies in the United States.
Click here to find a Roadware Distributor near you.
Bill Neal of Neals Design recently repaired spalled and cracked concrete on the fly at a service station in Washington. A customer had broken an ankle stepping out of a truck into the badly spalled concrete. Bill was able to make the repair in minutes, eliminating the safety hazard without major disruption to the service station.
Roadware 10 Minute Concrete Mender is your go to product for making long-lasting repairs with minimal downtime. At 70 degrees F or 21C, A Concrete Mender repair can be ready for heavy truck traffic in about 10 minutes.

The ultra low viscosity Concrete Mender mixes very easily with manufactured sand or quartz. A tough and durable polymer concrete mortar can be mixed in a bucket by hand with simple tools. No expensive pumps or power mixers needed. See how it is done here. Concrete Mender™ Bulk Application Instructions
Product used:
Roadware 10 Minute Concrete Mender™ Two-gallon Kit #80020

The Busan Transportation Corporation uses Roadware 10 Minute Concrete Mender to repair the roll-way of Busan Metro Line 4 in South Korea. Metro Line 4 is a rubber-tired line with 14 stations and runs driverless with pneumatic tires on a 6.7 mile (10.8km) concrete track. Concrete Mender is used to structurally repair the cross joints in the track approximately every ten meters.
Concrete Mender is the right product for the job because it has a long service life and cures in about 10 minutes. This allows for minimal down time and keeps the Busan Metro Line 4 running on time with minimal service interruption.
Repair crews of a very limited repair window, The train operates approximately 20 hours per day from 5am to 1am the next day. That leaves a minimal amount of time for maintenance and repair operations. Crews have to be efficient and productive. The fast cure and rapid strength gain of 10 Minute Concrete Mender is well suited for these mission critical applications.
Having a smoother roll-way saves wear and tear on the rubber tires and reduces operating costs. Roadware 10 Minute Concrete Mender will keep the Busan Metro Line 4 running smooth and efficiently for years to come.

Roadware 10 Minute Concrete Mender is a self-injecting structural polyurethane for the permanent repair of commercial floors, decks, slabs and surfaces. The exclusive Microdoweling™ action in Concrete Mender allows it to migrate past bond lines, restore aggregate interlock and make long lasting repairs.

Click here to request more information of find a local Roadware distributor.


Click here to request more information or find a local Roadware distributor.
The Hong Kong International airport HKG is home to the world’s busiest cargo gateway airport. In 2015, HKG moved over 4.38 million metric tonnes of air cargo. It is also one of the world’s business passenger airports accommodating over 68 million passengers that same year.

Operations at the world’s busiest cargo airport run 24/7/365 without stopping. Maintenance crews need a crack and joint repair material that can be applied in a wide range of conditions and be ready for service in minutes. Roadware Flexible Cement II is a tough polyurethane crack repair material that can be applied at any ambient temperature. It bonds very well to distressed concrete and forms a tough semi-elastic polymer that will withstand heavy airline traffic in about 15 minutes. Crews at HKG airport have relied on Roadware Flexible Cement II to make repairs whenever and wherever needed for over 5 years.




Roadware is exhibiting at the CP&S show in Milwaukee on October 20-22, 2016 in booth #119. NOW #219
The International Concrete Polishing & Staining Conference and Expo is the only event of its kind specifically designed for concrete polishing professionals. This show offers 20+ conference sessions, an Exhibit Hall featuring polishing equipment and products, slab demonstrations and more.
To take advantage of our exclusive VIP offer for free access to the CP&S Exhibit Hall, simply enter promo code RINC when registering online. We look forward to seeing you at the show! P.S. Be sure to check out the CP&S Conference, offering more than 20 technical and business management sessions geared specifically for concrete polishing professionals!
On Wednesday, October 19 … CP&S is offering Brad Humphrey’s All-Day Leadership Boot Camp for contractor owners and employee leaders in ANY construction business. With more than 35 years in the industry, Brad is a veteran construction contractor and coach who is in high demand throughout the industry. Don’t miss this intensive, all-day coaching session to help you take your company to the next level!
Downtime matters when concrete repair is taking place beneath finished flooring. Traditional repairs can turn a relatively small flooring problem into an extended interruption.
The original application highlights the 10-minute cure of Roadware 10 Minute Concrete Mender as a way to reduce the repair schedule.
For retail stores, commercial facilities, and other occupied buildings, that speed can make it practical to repair the concrete substrate and replace the affected flooring within a much shorter maintenance window.
VCT and other resilient floor coverings follow the profile of the concrete substrate beneath them. When a concrete crack or control joint deteriorates, the defect can eventually become visible through the finished flooring.
The right repair approach depends on the condition of the concrete. A deteriorated control joint with relatively flat adjoining slabs can require a very different repair from a crack where slab curling or movement has produced a significant elevation difference.
Before replacing damaged flooring, identify and repair the concrete condition underneath.

When a spalled or deteriorated control joint is reflecting through the flooring and the adjoining concrete slabs are not curled, the repair can be relatively straightforward.
Remove the affected flooring to expose the concrete. Clean out the deteriorated control joint using an appropriate dust-collecting diamond grinder and remove loose material and debris.
Repair the prepared joint with Roadware 10 Minute Concrete Mender. After the repair has cured, grind the repaired area flush with the surrounding concrete and replace the floor covering.
This approach addresses the damaged concrete beneath the flooring rather than simply covering the joint again.


Remove the VCT, ceramic tile, vinyl, or other flooring as necessary to expose the affected concrete.

Make parallel saw cuts along the affected crack. The original procedure specifies a depth of no less than 1.5 inches and ideally approximately 30% of the slab depth.

Chip out the concrete between the saw cuts. Thoroughly clean the prepared repair area using a wire brush and vacuum to remove loose material and debris.

Use Roadware 10 Minute Concrete Mender with sand to rebuild the prepared area to the finished grade. The underlying crack is also repaired with Concrete Mender as part of the procedure.
See Concrete Mender™ Bulk Application Instructions.

Finish the repaired concrete to the appropriate elevation and replace the floor treatment. The original procedure is designed to allow the repaired area to be reopened to traffic after completion.
When a crack or failed control joint is visible through VCT, vinyl, laminate, or tile, look beyond the floor covering. The condition of the concrete underneath should be evaluated and repaired before new flooring is installed.
For relatively flat slabs, that may mean cleaning and repairing a deteriorated control joint. For curled or buckled concrete, a deeper repair may be required to restore the affected area before the flooring goes back down.
Roadware 10 Minute Concrete Mender provides a fast-curing approach for repairing these underlying concrete conditions and preparing the floor for replacement flooring.
Repairing seasonal pop-outs in stamped and colored concrete is easy with MatchCrete™ Clear. Just add some powered pigment or grout to the clear MatchCrete™ aliphatic polyurethane and you can match most any color. Come back after 24 hours and give the repairs a light sanding to blend them in. See the short video below.
